Durable Digital Torque Meter High Sensitive Torque Tester Easy To
This torque tester is designed and manufactured for a variety of
torque an intelligent measurement tester. Mainly used for measuring
and testing a variety of electric screwdriver, pneumatic size
screwdriver, torque screwdriver and torque wrench torque;
correcting electric screwdriver, pneumatic screwdrivers, torque
screwdrivers and torque wrenches, torque cap torque to conform
need; you can also measure the torque of other tools, such as: a
variety of fixtures. The torque meter simple operation, high
accuracy, full-featured, easy to carry, suitable for a variety of
industrial products and service enterprises.
1. Torque orientation.
2. Automatic alarm settings.
3 .Can be stored and printed 10 test data.
4 .Autamatic calculation of the average of the data stored.
5. Can easily switch between Kgf.Cm, Lbf.in, Nm.
6. With peak hold function.
7. Shows exactly lithium battery.
8. 1-60 minutes adjustable-free operation of automatic shutdown of
the power design.
9. Green high-capacity lithium battery (1800 mA.h), safety
automatic charge control.
10. A touch of button, durable, reliable, easy to operate.
11.Can be connected to the computer and displayed in real time the
force value curve.
|Power supply||High-capacity lithium battery:7.4V|
|Charging time||≥8 hours|
|Full power continuous use||50 hours|
|Battery life||≥500 times|
|Size||1 2mm x 230rnm x 651mm|
|Battery charger||Input:AC 230V±10V, 50HZ. Output:LDC 15V 250mA|
1. Do not overload torque test, be sure to test the range of the
test torque, otherwise, would permanently damage the sensor torque
tester, a serious danger.
2 Do not knock or place objects on the LCD screen, to prevent
damage to the LCD screen.
3. Do not use nails, sharp or pointed objects pressing the function
key; but can not loosen the screws torque test head.
4. Do not use a torque tester in water, oil or other liquids
spilled place to be the torque tester stored in a cool, dry place
and no vibration, in order to ensure the stability and accuracy of
the test data.
5. Do not open the device, easily adjust non-electrical components
inside the device.
6. The device is a precision calibration equipment should be in use
and handling gently.
☆Storage and average calculation:
1.【Turn on the power】->into the【PEAK】mode->press【MEMORY】key
to enter the storage mode -> start the test (writhing test head
and then press the zero key on the left display repeated several
times to observe 1-10 store to properly store the data, if the data
is stored to the correct number after there will be "√" appears
when the store several sets of data after press 【MEMORY】key to exit
the storage mode and automatically calculate the average of press
again to get the required data after 【MEMORY】 key when there is an
arrow in front of store numbers can press 【CLR】Clear.