Wall Mounting Secureness Tester
The test device is used for wall mounting secureness test as per
UL498 figure 143.2.
It is used to check when the socket installed on the test wall,
then add force through the spring device, checking whether the
installation of the socket is shift and test wall is damaged.
The test device is easy to be operated, the test times (up to 9999
times) can be preset, the test time is adjustable. When the display
value of test times reaches the preset value, the test will stop
Picture for reference:
|Parameters Name||Parameter Data|
|Input supply||AC120V±10%, 60Hz|
|Moving method||Bidirectional cylinder|
|Counter||0~9999 times, adjustable|
|Force||22lbf (97.8 N), displayed and controlled by the force sensor|
|Note: the test wall is prepared by the user.|