Screwless Terminals Deflecting Tester +Voltage Drop Tester
|Parameters Name||Parameter Data|
|Input supply||AC120V±10%, 60Hz|
|Deflecting direction||In any of the 12 directions differing from each other by 30°±3°|
|Deflecting force||0.25N, 0.5N, 1.0N|
|Force applied direction||Perpendicular to the undeflected conductor|
This device complies with IEC 60884-1 clause 12.3.12 and figure 12,
it is used to use to check whether the screwless terminals
connected rigid solid conductor remains clamped, even when it has
been deflected during normal installation. Deflecting the conductor
and measuring the voltage drop, to check the screwless terminal
clamping capacity and contacting performance.
The device is easy for operating, the load current is 0-30A
stepless adjustable,,the sample fixture is manufactured according
to the standard requirements.
Picture for reference: